1.11. Transmission

Mechanical transmission
Special interlock
excludes switching by mistake from the 5th transfer on a backing. The lever of gear shifting it is necessary previously
to establish in neutral situation before including transfer of a backing.

Automatic transmission
The movement with the automatic transmission

Fig. 1.14. Provisions of the lever of the selector of the automatic transmission


For the movement of the car with the automatic transmission in the normal mode it is necessary to include only a step of the movement "D". If the lever of the selector has to be moved to situation "R" or "P" or it needs to be transferred from a D position in a 2 position or from a 2 position in a 1 position, it is necessary to press the button on the handle of the lever of the selector (fig. 1.14). When moving the lever of the selector of management of an automatic box to the position specified by an arrow of black color it is necessary to press the button on the lever handle. In the direction specified by a light arrow the control lever the transmission can move without pressing of the button.

PREVENTIONS
When switching the lever from neutral situation or situation for the parking on the movement or a backing press a brake pedal.
Only when the car will stop, install the selector lever in a R or P position.
Never increase the frequency of rotation of a bent shaft of the engine to great values on transfers of the forward course at the included brake.
Do not hold the car on rises by increase in frequency of rotation of a bent shaft of the engine at all. Surely include a brake.
Carry out switching idling from situation "N" or "P" in a position of the movement "1", "2", "D" or "R".
Carry out switching idling from situation "N" or "P" in a position of the movement "1", "2", "D" or "R".

Launch of the engine
At launch of the engine the lever of the selector has to be in a position "P" or "N".
"Р" (parking).
Driving wheels are blocked.
The selector should be installed in this position only at a full stop of the car. Before switching off of this position at the included ignition it is necessary to press a brake pedal in addition.

PREVENTION
Position of the parking cannot be used as the parking brake. If you leave the car even for a short time, always turn on the parking brake, include situation for the parking and take out a key from the ignition switch. The car cannot be left unguarded at the working engine.

"R" (backing).
It is necessary to include only at a full stop of the car and during the operation of the engine idling.
In a R position at the included ignition backing lamps burn.
"N" (neutral situation).
Provision of idling.
"D" (movement).
Transfers switch automatically with low to higher and vice versa depending on load of the engine and speeds of the movement.
Under certain conditions the movements expediently temporarily to use one of the positions given below.
"2" (second step of the movement).
This situation has to join at the movement in an intensive or slow transport stream, at the movement on rises, under a bias and for achievement of more considerable effect of braking by the engine, at start-off from the place on the slippery road or in other situations in which "soft" acceleration is desirable. Pay attention to that at a step of the movement "2" not to exceed the speed of 120 km/h or 110 km/h (1,6 l).
"1" (first step of the movement).
This step of the movement is provided for transfer of great traction efforts and for the movement on the steep slope or during abrupt descent. Pay attention to that at a step of the movement "1" not to exceed the speed of 70 km/h or 60 km/h (1,6 l).
The device of the compulsory anticipating switching to lower transfer ("Kick-down"). The device provides the maximum acceleration of the car in these traffic conditions. As soon as the effort to a pedal of an accelerator exceeds a certain threshold value, depending on the frequency of rotation and speed of the movement there is a switching to one of lower transfers. Switching to the following, higher transfer will follow only at achievement of the most admissible value of frequency of rotation of a bent shaft of the engine.
Start-off from the place on considerable rises.
The left leg press a pedal of a brake and move the selector lever to a D or 1 position. The right leg slowly press a pedal of an accelerator and at the same time release a brake pedal.