1.4. Front seats
The correct installation of seats is necessary for providing:
– easy access to governing bodies;
– high comfortableness of a trip;
– maximum efficiency of action of belts and safety cushions.
Fig. 1.4. Directions of adjustment of provision of a seat of the driver: 1 – handle of control of a basic ledge; 2 – lever of adjustment lumbar subtime; 3 – lever of adjustment of longitudinal provision of a seat; 4 – lever of adjustment of height of a forward part of a pillow of a seat; 5 – lever of adjustment of height of a back part of a pillow of a seat; 6 – lever of saving provision of a seatback; 7 – lever of adjustment of an inclination of a seatback; and – the directions of an inclination of a head restraint; b – directions of movement of a basic ledge; with – the direction of movement lumbar a subtime; d – direction of movement of a forward part of a pillow of a seat; е – direction of longitudinal movement of a seat; f – direction of movement of a back part of a pillow of a seat; g – direction of an inclination of a seatback; h – direction of movement of a head restraint
The provision of a seat of the driver can be regulated in several various directions (fig. 1.4).
The seat of the driver is recommended to be established as follows:
– adjust the provision of a seat in the longitudinal plane so that pedals could be squeezed out the legs which are completely slightly bent in knees;
– adjust the provision of a seatback so that the back completely adjoined to the driver's back, and the top point of a steering wheel could be got the hands which are slightly bent in elbows.
For safety it is necessary to regulate seats only on the motionless car.
Exact adjustment of provision of a seatback.
Press the lever down or pull it up and reject a back forward or back.
During the movement it is impossible to incline too strongly back a seatback as it significantly reduces efficiency of action of seat belts.
Adjustment lumbar subtime.
By means of the lever from the inside of a seat adjust situation lumbar a subtime. It can be established in three various provisions.
Adjustment of height of a forward part of a pillow of a seat. Height of a forward part of a pillow of a seat can be adjusted as follows:
– for raising of a forward part of a pillow of a seat pull for the lever and a trunk slightly press a seatback;
– for lowering of a forward part of a pillow of a seat pull for the lever and a trunk slightly press a forward part of a pillow.
Adjustment of height of a back part of a pillow of a seat.
Height of a back part of a pillow of a seat can be adjusted by means of the lever.
Adjustment of provision of a seat in the longitudinal direction.
Pull the lever up and shift a seat. Then release the lever and advance a seat before operation of a clamp a little more.
Do not enclose any objects under front seats – it can break blocking of a seat.
Adjustment of an inclination of a head restraint.
The provision of a head restraint can be adjusted by its inclination forward or back.
Adjustment of basic ledges.
Side basic ledges can be adjusted by means of the handle located on internal lateral face of a seatback.
Saving provision of a seatback.
If the lever of preservation is installed in the preferable provision of a seatback within a preservation zone, then this provision of a back remains, and the provision of a back kept before is cancelled.
If the lever of preservation is installed in the provision "A" of a seatback, the back can be cast away to the provision "C" inclusive (fig. 1.5) back. Provisions of a seatback in a zone between "With" and "In" can be kept.
If the lever of preservation is put in action outside this zone, situation "C" always remains.
You watch that on the preservation lever incidentally there did not step a leg passengers sitting on a back seat.
Landing to back seats
Fig. 1.6. An arrangement of the lever and a pedal for tilting of a seatback of the forward passenger and movement of a seat forward
The seatback of the forward passenger leans back forward, and the seat is automatically displaced forward if to pull the lever up or to press a pedal (fig. 1.6). After landing or after disembarkation of passengers move a seat back until it is not reliably recorded.
During the movement the passengers sitting on a back seat cannot press a pedal.
System of heating of a front seat
Seats of the driver and the forward passenger are equipped with own switches of heating which can be switched on only in that case when the key in the lock of ignition is in the provision of "ON" ("II"). The thermostat in system of heating of a seat includes heating at a temperature less than 12 °C and switches off at 32 °C.
The backs of a back seat which are thrown back separately
For increase in capacity of the luggage compartment of a back of a back seat can lean back separately.
Tilting of seatbacks.
Pull for the button of blocking and move a seatback (fig. 1.7) down.
Reject a seatback up and press it down to that time until it enters a clamp.
The displayed back seat.
Completely it is possible to spread out a back seat as follows.
Fig. 1.8. The three first stage of unfolding of a back seat: 1 – direction of removal of a head restraint; 2 – direction of movement of the lever of fixing of a pillow of a seat; 3 – direction of raising of a pillow of a seat
1. Remove a head restraint (fig. 1.8).
2. Pull for the lever of fixing of a pillow of a seat.
3. Lift a seat pillow for a first line up.
Fig. 1.9. Two last stages of unfolding of a back seat: 1 – direction of tilting of a pillow of a seat; 2 – direction of tilting of a seatback
4. Cast away a seat pillow (fig. 1.9) forward.
5. Pull for the button of blocking and cast away a seatback down.
At installation of a pillow in initial situation pull the lever of fixing of a pillow of a seat and press a pillow down.
After installation of a seatback pull for it forward to be convinced that it is reliably recorded.
When tilting a pillow of a seat in a starting position place seat belts on a seat that they could use at any time.
At the thrown-back back of a back seat it is impossible to stack baggage higher than the level of a back of a front seat. The baggage needs to be fixed strongly that at sharp braking or in case of accident it could not be displaced forward and by that did not create a dangerous situation.