12.1. Cowl

Open a cowl.
Place protective laying at the edges of a motor compartment for protection of the painted surfaces against damages. Enclose pure rags under cowl corners that at its removal to protect a paint and varnish covering of the car.
Mark with a marker position of hinges on a cowl.
Ask the assistant to support a cowl in open situation and turn off bolts of fastening of hinges, and then remove a cowl from the car.

Installation is carried out to the sequences, the return to removal. By means of two people establish a cowl and screw by hand bolts of fastening of hinges of a cowl. Level cowl hinges according to earlier made tags and tighten bolts of fastening of a cowl.

Adjustment of situation
Close a cowl and check its arrangement of rather adjacent surfaces. Adjust the provision of a cowl so that at the closed cowl the gap on its perimeter was identical from all directions. For adjustment weaken bolts of fastening of hinges of a cowl and, moving a cowl, adjust its situation. After adjustment tighten bolts of fastening of hinges of a cowl. If necessary adjust a gap, changing position of forward wings of the car.