12:15. Seats

Front seat
If seats with heating are established, disconnect a wire from the negative plug of the rechargeable battery.

Fig. 12.24. Seats: 1 – arm; 2 – pillow of a back seat; 3 – backs of back seats; 4 – head restraint; 5 – backs of front seats; 6 – covers; 7 – mechanism of adjustment of a tilt angle of a seat;
8 – mechanism of seat height adjustment; 9 – mechanism of adjustment of longitudinal movement of a seat; 10 – mechanism of adjustment lumbar subtime; 11 – side regulator


As far as possible, move a seat back and unscrew screws, the fixing forward parts of the directing sled of seats of the car to a floor (fig. 12.24).
As far as possible, move a seat forward and unscrew screws, the fixing back parts of the directing sled of seats of the car to a floor.
Remove all side decorative panels which can complicate removal of a seat. Disconnect the contact socket from a heater of a seat and remove a seat.

Fig. 12.25. Places (1) of putting lubricant on the directing sled of a front seat


Installation is carried out to the sequences, the return to removal. Grease the directing seat sled (fig. 12.25).

Back seat
The pillow of a motionless back seat can be removed, having pressed down and back. Then take it from the car. The pillow on hinges can be rejected forward then turn off bolts of fastening of hinges or hinges.
Turn off loops or arms of fastening of a seatback and remove a back.
Installation is carried out to the sequences, the return to removal.

Heaters of seats
Some models are equipped with electric heating elements of front seats. If in work of system failures and malfunctions are observed, first of all check safety locks and fusible crossing points.

Fig. 12.26. Identification of contacts of the switch of a heater of a seat: and, b, with – contacts


Disconnect the switch of a heater of a seat and check presence of tension on contacts of the switch. At the switched-on switch ("ON") between contacts of "b" (a wire of green color) and "with" (a wire of blue color) there has to be tension (fig. 12.26). If it is absent, replace the switch.

Fig. 12.27. Check of tension on contacts of the socket of a heater of a pillow of a front seat


Disconnect under a seat the contact socket from a seat pillow heater. Check the socket for presence of tension. Between contacts of two-contact ("W") and four-contact ("In") sockets there has to be tension (fig. 12.27). If tension is absent, the heater or conducting of a heater are faulty.

Fig. 12.28. Check of tension on contacts of the socket of a heater of a back of a front seat


Check the seatback heater socket for presence of tension. Between contact of "Y" (fig. 12.28) the one-contact socket and contact "In" the four-contact socket has to be tension. If tension is absent, the heater or conducting of a heater are faulty.
Heaters can be replaced only together with a pillow or a seatback.