12.2. Lock and cable of the drive of the lock
Remove a forward lattice of decorative facing.
If it is necessary to install repeatedly the locking mechanism of a cowl, a marker note position of the lock.
Turn off a lock nut and a bolt, separate a cable of the drive of the lock of a cowl and remove the locking mechanism (fig. 12.1).
In interior of the car weaken a nut of fastening of a cable and disconnect it from a bracket.
Tie a cord to a cable, extend it in interior of the car and untie a cord, having left it in a partition of a motor compartment. The cord will be required for retraction of a new cable into place.
Tie a cord to a new cable and stretch it in a partition of a motor compartment.
Further installation is carried out to the sequences, the return to removal.
If the old cable is damaged, the cowl can be opened, having raised a forward part of the car and having put in action the lock from below of the car for what use the long thin screw-driver.