12.3. Back door

Removal
Disconnect a wire from the negative plug of the rechargeable battery.
Open a back door and establish under it an emphasis.
Place protective laying at the edges of an aperture of a back door for protection of the painted surfaces against damages. Enclose pure rags under the top corners of a back door to protect a paint and varnish covering of the car at its removal.
Mark with a marker the provision of loops of a back door.

Fig. 12.2. Arrangement of elements of a back door: 1 – mechanism of unlocking of the lock of a back door;
2 – back door; 3 – sealant; 4 – loop; 5 – upholstery panel; 6 – shock plate; 7 – lock; 8 – cable of the drive of the lock of a back door; 9 – emphasis of a back door


Turn off bolts and remove an emphasis of 9 (fig. 12.2).
Disconnect all plaits of wires which can create hindrances at removal of a back door.
Turn off bolts of loops of fastening and with the assistant remove a back door.

Installation
Arrange a back door so that the provision of loops coincided with the tags put before removal of a door.
Screw bolts of fastening of loops and a rack and reliably tighten them. Connect all plaits of wires.

Adjustment

Fig. 12.3. The directions of movement at adjustment of provision of a loop of a back door


Fig. 12.4. The directions of movement at adjustment of provision of a shock plate of a back door


The provision of a loop and shock plate can be regulated after weakening of bolts of fastening of a shock plate and nuts of fastening of loops on a body (fig. 12.3, 12.4). For access to nuts of fastening of loops the lever carefully raise the panel of an upholstery of a door and an upholstery of a ceiling of salon and, moving a door, adjust its situation.

Emphasis of a back door
Completely open a back door.
Turn off the nut fixing an emphasis to a back door.
Turn off the lower bolts fixing an emphasis to a body and remove a door.
Installation is carried out to the sequences, the return to removal.