13:10. Dashboard switches

Disconnect a wire from the negative plug of the rechargeable battery.

Blocks of switches
Remove a combination of devices.

Fig. 13.46. Elements of fastening of the right block of switches: 1 – a plait of wires with the socket; 2, 3 – arms; 4, 5 – screws of fastening of an arm; 6, 7, 14 – screws of fastening of a casing; 8 – casing; 9 – screw of fastening of the switch of screen wipers; 10 – switch of screen wipers of a windshield;
11 – switch of a washer of a windshield and switch of single inclusion of screen wipers; 12 – screw and cap; 13 – casing of switches


Turn out screws, disconnect the socket and remove the required block of switches from a casing of a combination of devices (fig. 13.46, 13.47). For a socket detachment the screw-driver wring out a socket clamp (fig. 13.48).

Fig. 13.48. Use of the screw-driver for a socket clamp otzhatiya


Fig. 13.47. Elements of fastening of the left block of switches: 1 – a plait of wires with the socket; 2 – arm; 3 – screw of fastening of a casing; 4 – casing of switches; 5 – screw and cap; 6 – screw of fastening of the switch of headlights; 7 – switch of headlights; 8 – screw of fastening of a casing; 9 – casing; 10 – switch of the alarm light system and heater of back glass; 11 – screw of fastening of the block of switches; 12 – screw of fastening of an arm; 13 – screw; 14 – arm


Installation is carried out to the sequences, the return to removal.

Separate switches
Accurately wring out the switch from its nest, disconnect the socket and remove the switch.
Installation is carried out to the sequences, the return to removal.