13:12. Screen wipers

 Windshield screen wiper
Disconnect a wire from the negative plug of the rechargeable battery.

Fig. 13.53. Windshield screen wiper: 1 – screen wiper brush; 2 – nut and lever of a screen wiper; 3 – cover; 4 – bolt of fastening of the mechanism of screen wipers; 5 – mechanism of screen wipers; 6 – bolt of fastening of the electric motor of screen wipers; 7 – electric motor of screen wipers; 8 – lattice


Lift levers, disconnect and remove brushes (fig. 13.53).
Turn off nuts and remove levers of screen wipers.
Remove a lattice and a cover in the windshield basis.

Fig. 13.54. Use of the screw-driver for separation of the electric motor from the mechanism of screen wipers


Turn out bolts, disconnect the socket, the screw-driver separate and remove the screen wiper electric motor (fig. 13.54).
Turn out bolts and remove the screen wiper mechanism from the car through an opening in a body.
Installation is carried out to the sequences, the return to removal. Install screen wiper levers so that brushes of a screen wiper settled down parallel to the lower part of a windshield.

Screen wiper of back glass
Disconnect a wire from the negative plug of the rechargeable battery.

Fig. 13.55. Screen wiper of back glass: 1 – screen wiper brush; 2 – screen wiper lever; 3 – rubber consolidation; 4 – screen wiper engine; 5 – arm


Lift levers, disconnect and remove brushes and rubber consolidation (fig. 13.55).
Open a trunk lid and remove an upholstery.
Turn out bolts, remove an arm and the engine of a screen wiper.
Installation is carried out to the sequences, the return to removal.

Windscreen washer pump

Fig. 13.56. Washer of headlights: 1 – tank; 2 – pump; 3 – hoses; 4 – safety valve;
5 – jet; 6 – switch


On all models the windshield washer pump is installed. Depending on the installed equipment additional pumps for a washer of back glass and washers of forward headlights can be installed (fig. 13.56).
Removal of pumps of all washers is carried out similarly. Merge as much as possible liquid from a tank of washers and prepare rags for collecting the liquid following at removal.
Disconnect hoses and the socket from the pump. Remove the pump, having extended it from a tank (if it is installed thus) or having exempted from fixing clips.
Installation is carried out to the sequences, the return to removal.
At installation use new consolidations and if it is necessary, hoses.