6.7. Cable of control of the air gate

Disconnect a wire from the negative plug of the rechargeable battery.
Remove the air filter.
Disconnect a cable of control of the air gate from the carburetor for what release the screw of fastening of a collar, get a cover of a cable from a collar and disconnect a cable.
Turn off a ring nut of fastening of a cover of a cable to the dashboard, available of interior of the car. Turn on 180 ° the handle of management and turn out the secret screw of fastening of the handle.
Remove the handle of management from the dashboard. Turn out the screw of fastening of the light indicator of opening of the air gate and remove the indicator from a cable cover.
Take out a cable from a rubber cover in a wall of a motor compartment and extend outside.
Installation is carried out to the sequences, the return to removal, taking into account the following.
Adjust the provision of a cover of a cable in a collar so that at the position of the handle of management moved against the stop very low free wheeling of a cable was felt.
Ask the assistant to move against the stop and to completely extend the cable handle – the air gate has to open and be closed completely.
Install the air filter and connect a wire to the negative plug of the rechargeable battery. Check correctness of operation of the light indicator.